HPE 5900 series

241
display ipv6 dhcp server statistics
Use display ipv6 dhcp server statistics to display DHCPv6 packet statistics on the DHCPv6
server.
Syntax
display ipv6 dhcp server statistics [ pool pool-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pool pool-name: Displays DHCPv6 packet statistics for the DHCPv6 address pool specified by its
name, a case-insensitive string of 1 to 63 characters. If you do not specify an address pool, this
command displays DHCPv6 packet statistics for all address pools.
Examples
# Display all DHCPv6 packet statistics on the DHCPv6 server.
<Sysname> display ipv6 dhcp server statistics
Bindings:
Ip-in-use : 1
Pd-in-use : 0
Expired : 0
Conflict : 0
Packets received : 1
Solicit : 1
Request : 0
Confirm : 0
Renew : 0
Rebind : 0
Release : 0
Decline : 0
Information-request : 0
Relay-forward : 0
Packets dropped : 0
Packets sent : 0
Advertise : 0
Reconfigure : 0
Reply : 0
Relay-reply : 0
Table 61 Command output
Field
Description
Bindings
Number of bindings:
• Ip-in-use—Total number of address bindings.
• Pd-in-use—Total number of prefix bindings.
• Expired—Total number of expired address bindings.