HPE 5900 series

237
Usage guidelines
If you do not specify any parameters, this command displays lease expiration information for all IPv6
address pools.
DHCPv6 assigns the expired IPv6 addresses to DHCPv6 clients when all available addresses have
been assigned.
Examples
# Display all lease expiration information.
<Sysname> display ipv6 dhcp server expired
IPv6 address DUID Lease expiration
2001:3eff:fe80:4caa: 3030-3066-2e65-3230-302e- Apr 25 17:10:47 2007
37ee:7::1 3130-3234-2d45-7468-6572-
6e65-7430-2f31
Table 58 Command output
Field
Description
IPv6 address Expired IPv6 address.
DUID Client DUID bound to the expired IPv6 address.
Lease expiration Time when the lease expired.
Related commands
reset ipv6 dhcp server expired
display ipv6 dhcp server ip-in-use
Use display ipv6 dhcp server ip-in-use to display binding information for assigned IPv6
addresses.
Syntax
display ipv6 dhcp server ip-in-use [ address ipv6-address | pool pool-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
address ipv6-address: Displays binding information for the specified IPv6 address.
pool pool-name: Displays binding information for the IPv6 address pool specified by its name, a
case-insensitive string of 1 to 63 characters.
Usage guidelines
If you do not specify any parameters, this command displays binding information for all assigned
IPv6 addresses.
Examples
# Display binding information for all assigned IPv6 address.
<Sysname> display ipv6 dhcp server ip-in-use
Pool: 1