HPE 5900 series

121
Parameters
http-get: Uses the get operation.
http-post: Uses the post operation.
Usage guidelines
This command applies to DDNS updates in HTTP/HTTPS. If the DDNS server uses HTTP or HTTPS
service, choose a parameter transmission method compatible with the DDNS server. For example, a
DHS server supports the http-post method.
If the DDNS policy has been applied to an interface, a DDNS update is sent immediately after the
parameter transmission is changed.
Examples
# Specify the parameter transmission method as http-post for DDNS update request for DDNS
policy steven_policy.
<Sysname> system-view
[Sysname] ddns policy steven_policy
[Sysname-ddns-policy-steven_policy] method http-post
Related commands
ddns policy
display ddns policy
password
Use password to specify the password to be included in the URL address for DDNS update
requests.
Use undo password to remove the password.
Syntax
password { cipher | simple } password
undo password
Default
No password is specified for the URL address.
Views
DDNS policy view
Predefined user roles
network-admin
Parameters
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
password: Specifies a case-sensitive password string. If simple is specified, it must be a string of 1
to 32 characters. If cipher is specified, it must be a string of 1 to 73 characters.
Usage guidelines
For security purposes, all passwords, including passwords configured in plain text, are saved in
ciphertext.