HPE 5900 series

183
Field
Description
Age
A hyphen (-) indicates a static entry.
For a dynamic entry, this field displays the elapsed time in seconds. If the neighbor is
never reachable, this field displays a pound sign (#).
Vpn-instance
Name of a VPN or
[No Vrf]
with no VPN configured.
Related commands
ipv6 neighbor
reset ipv6 neighbors
display ipv6 neighbors count
Use display ipv6 neighbors count to display the number of neighbor entries.
Syntax
display ipv6 neighbors { { all | dynamic | static } [ slot slot-number ] | interface interface-type
interface-number | vlan vlan-id } count
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Displays the total number of all neighbor entries, including neighbor entries created dynamically
and configured statically.
dynamic: Displays the total number of neighbor entries created dynamically.
static: Displays the total number of neighbor entries configured statically.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number.
interface interface-type interface-number: Specifies an interface by its type and name.
vlan vlan-id: Specifies a VLAN by its ID. The value range for VLAN ID is 1 to 4094.
Examples
# Display the total number of neighbor entries created dynamically.
<Sysname> display ipv6 neighbors dynamic count
Total number of dynamic entries: 2
display ipv6 neighbors entry-limit
Use display ipv6 neighbors entry-limit to display the maximum number of ND entries that a device
supports.
Syntax
display ipv6 neighbors entry-limit
Views
Any view