HPE 5900 series

188
Table 48 Command output
Field
Description
Local Addr Local IPv6 address.
Foreign Addr Peer IPv6 address.
Protocol Protocol number.
Slot ID of the IRF member device.
PCB PCB index.
display ipv6 rawip verbose
Use display ipv6 rawip verbose to display detailed information about IPv6 RawIP connections.
Syntax
display ipv6 rawip verbose [ slot slot-number [ pcb pcb-index ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pcb pcb-index: Specifies a PCB by its index in the range of 1 to 16.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number.
Usage guidelines
Detailed information about an IPv6 RawIP connection includes socket's creator, state, option, type,
and protocol number, and source and destination IPv6 addresses of the connection.
Examples
# Display detailed information about an IPv6 RawIP connection.
<Sysname> display ipv6 rawip verbose
Total RawIP socket number: 1
Slot: 6
Creator: ping ipv6[320]
State: N/A
Options: N/A
Error: 0
Receiving buffer(cc/hiwat/lowat/state): 0 / 9216 / 1 / N/A
Sending buffer(cc/hiwat/lowat/state): 0 / 9216 / 512 / N/A
Type: 3
Protocol: 58
Connection info: src = ::, dst = ::
Inpcb flags: N/A
Inpcb vflag: INP_IPV6
Hop limit: 255 (minimum hop limit: 0)