HPE 5900 series

10
Syntax
display arp timer aging
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the aging timer of dynamic ARP entries.
<Sysname> display arp timer aging
Current ARP aging time is 10 minute(s)
Related commands
arp timer aging
display arp vpn-instance
Use display arp vpn-instance to display the ARP entries for a VPN instance.
Syntax
display arp vpn-instance vpn-instance-name [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to
31 characters.
count: Displays the number of ARP entries.
Usage guidelines
This command displays information about ARP entries for a VPN instance, including the IP address,
MAC address, VLAN ID, output interface, entry type, and aging timer.
Examples
# Display ARP entries for the VPN instance named test.
<Sysname> display arp vpn-instance test
Type: S-Static D-Dynamic O-Openflow M-Multiport I-Invalid
IP address MAC address VLAN ID Interface Aging Type
20.1.1.1 00e0-fc00-0001 N/A N/A N/A S
Related commands
arp static
reset arp