HPE 5900 series

212
Related commands
display ipv6 interface
ipv6 nd ra halt
Use ipv6 nd ra halt to suppress an interface from advertising RA message.
Use undo ipv6 nd ra halt to disable this function.
Syntax
ipv6 nd ra halt
undo ipv6 nd ra halt
Default
An interface is suppressed from sending RA messages.
Views
Interface view
Predefined user roles
network-admin
Examples
# Disable RA message suppression on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] undo ipv6 nd ra halt
ipv6 nd ra hop-limit unspecified
Use ipv6 nd ra hop-limit unspecified to specify unlimited hops in RA messages.
Use undo ipv6 nd ra hop-limit unspecified to restore the default.
Syntax
ipv6 nd ra hop-limit unspecified
undo ipv6 nd ra hop-limit unspecified
Default
The maximum number of hops in the RA messages is limited to 64.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
To set the maximum number of hops to a value rather than the default setting, use the ipv6 hop-limit
command.
Examples
# Specify unlimited hops in the RA messages on VLAN-interface 100.
<Sysname> system-view