HPE 5900 series

194
Creator: telnetd_mips[199]
State: ISCONNECTED
Options: N/A
Error: 0
Receiving buffer(cc/hiwat/lowat/state): 0 / 65536 / 1 / N/A
Sending buffer(cc/hiwat/lowat/state): 0 / 65536 / 512 / N/A
Type: 1
Protocol: 6
Connection info: src = 2001::1->23 , dst = 2001::2->4181
Inpcb flags: N/A
Inpcb vflag: INP_IPV6
Hop limit: 255 (minimum hop limit: 0)
Connection state: ESTABLISHED
Send VRF: 0x0
Receive VRF: 0x0
Table 51 Command output
Field
Description
TCP inpcb number Number of IPv6 TCP Internet PCBs.
tcpcb number Number of IPv6 TCP PCBs (excluding PCBs of TCP in TIME_WAIT state).
Slot ID of the IRF member device.
Creator Task name of the socket. The process number is in the square brackets.
State Socket state.
Options Socket options.
Error Error code.
Receiving
buffer(cc/hiwat/lowat/state)
Displays receive buffer information in the following order:
• cc—Used space.
• hiwat—Maximum space.
• lowat—Minimum space.
• state—Buffer state:
 CANTSENDMORE—Unable to send data to the peer.
 CANTRCVMORE—Unable to receive data from the peer.
 RCVATMARK—Receiving tag.
 N/A—None of the above states.
Sending
buffer(cc/hiwat/lowat/state)
Displays send buffer information in the following order:
• cc—Used space.
• hiwat—Maximum space.
• lowat—Minimum space.
• state—Buffer state:
 CANTSENDMORE—Unable to send data to the peer.
 CANTRCVMORE—Unable to receive data from the peer.
 RCVATMARK—Receiving tag.
 N/A—None of the above states.
Type
Socket type:
• 1—SOCK_STREAM. This socket uses TCP to provide reliable
transmission of byte streams.
• 2—SOCK_DGRAM. This socket uses UDP to provide datagram
transmission.