HPE 5920 series

99
<Sysname> display dhcp snooping trust
DHCP snooping is enabled.
Interface Trusted
========================= ============
Ten-GigabitEthernet1/0/1 Trusted
Related commands
dhcp snooping trust
reset dhcp snooping binding
Use reset dhcp snooping binding to clear DHCP snooping entries.
Syntax
reset dhcp snooping binding { all | ip ip-address [ vlan vlan-id ] }
Views
User view
Predefined user roles
network-admin
Parameters
all: Clears all DHCP snooping entries.
ip ip-address: Clears the DHCP snooping entry for the specified IP address.
vlan vlan-id: Clears DHCP snooping entries for the specified VLAN.
Examples
# Clear all DHCP snooping entries.
<Sysname> reset dhcp snooping binding all
Related commands
display dhcp snooping binding
reset dhcp snooping packet statistics
Use reset dhcp snooping packet statistics to clear DHCP packet statistics for DHCP snooping.
Syntax
reset dhcp snooping packet statistics [ slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number.
Usage guidelines
If you do not specify the slot slot-number option, this command clears DHCP packet statistics for the
device where the command is executed.