HPE 5920 series

53
# Configure match rule 3 to match DHCP requests that contain Option 82. Option 82's highest bit of
the fourth byte is 1 for the DHCP user class exam.
<Sysname> system-view
[Sysname] dhcp class exam
[Sysname-dhcp-class-exam] if-match rule 3 option 82 hex 00000080 mask 00000080
Related commands
dhcp class
nbns-list
Use nbns-list to specify WINS server addresses in a DHCP address pool.
Use undo nbns-list to remove the specified WINS server addresses.
Syntax
nbns-list ip-address&<1-8>
undo nbns-list [ ip-address&<1-8> ]
Default
No WINS server address is specified.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
ip-address&<1-8>: Specifies WINS server IP addresses. &<1-8> indicates that you can specify up to
eight WINS server addresses separated by spaces.
Usage guidelines
If you use this command multiple times, the most recent configuration takes effect.
If you do not specify any parameters, the undo nbns-list command deletes all WINS server
addresses.
Examples
# Specify the WINS server IP address 10.1.1.1 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] nbns-list 10.1.1.1
Related commands
display dhcp server pool
netbios-type
netbios-type
Use netbios-type to specify the NetBIOS node type in a DHCP address pool.
Use undo netbios-type to remove the specified NetBIOS node type.