HPE 5920 series

102
DNS commands
display dns domain
Use display dns domain to display the domain name suffixes.
Syntax
display dns domain [ dynamic ] [ vpn-instance vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dynamic: Displays the domain name suffixes dynamically obtained through DHCP or other
protocols. If you do not specify this keyword, the command displays the statically configured and
dynamically obtained domain name suffixes.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. To display domain name suffixes on the public network,
do not use this option.
Examples
# Display domain name suffixes on the public network.
<Sysname> display dns domain
Type:
D: Dynamic S: Static
No. Type Domain suffix
1 S com
2 D net
Table 22 Command output
Field
Description
No. Sequence number.
Type
Domain name suffix type:
• S—A statically configured domain name suffix.
• D—A domain name suffix dynamically obtained through DHCP or other protocols.
Domain suffix Domain name suffixes.
Related commands
dns domain
display dns host
Use display dns host to display information about domain name-to-IP address mappings.