HPE 5920 series

148
Field
Description
• INP_ANONPORT—Port number not specified.
• INP_RECVIF—Records the input interface of the packet.
• INP_RECVTTL—Receives TTL of the packet. Only UDP and
RawIP support this flag.
• INP_DONTFRAG—Sets the Don't Fragment flag.
• INP_ROUTER_ALERT—Receives packets with the router alert
option. Only RawIP supports this flag.
• INP_PROTOCOL_PACKET—Identifies a protocol packet.
• INP_RCVVLANID—Receives the VLAN ID of the packet. Only
UDP and RawIP support this flag.
• INP_RCVMACADDR—Receives the MAC address of the
frame.
• INP_SNDBYLSPV—Sends through MPLS.
• INP_RECVTOS—Receives TOS of the packet. Only UDP and
RawIP support this flag.
• INP_USEICMPSRC—Uses the specified IP address as the
source IP address for outgoing ICMP packets.
• INP_SYNCPCB—Waits until Internet PCB is synchronized.
• N/A—None of the above flags.
Inpcb vflag
IP version flags in the Internet PCB:
• INP_IPV4—IPv4 protocol.
• INP_TIMEWAIT—In TIMEWAIT state.
• INP_ONESBCAST—Sends broadcast packets.
• INP_DROPPED—Protocol dropped flag.
• INP_SOCKREF—Strong socket reference.
• INP_DONTBLOCK—Do not block synchronization of the
Internet PCB.
• N/A—None of the above flags.
TTL TTL value in the Internet PCB.
display tcp
Use display tcp to display brief information about TCP connections.
Syntax
display tcp [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number.
Usage guidelines
Brief TCP connection information includes local IP address, local port number, peer IP address, peer
port number, and TCP connection state.