HPE 5920 series User Manual

77
ip ip-address: Clears the relay entry for the specified IP address.
vpn-instance vpn-instance-name: Clears the relay entry for the specified IP address in the specified
MPLS L3VPN instance. The vpn-instance-name is a case-sensitive string of 1 to 31 characters. If
you do not specify a VPN instance, this command clears the relay entry in the public network.
Usage guidelines
If you do not specify any parameters, this command clears all relay entries on the DHCP relay agent.
Examples
# Clear all relay entries on the DHCP relay agent.
<Sysname> reset dhcp relay client-information
Related commands
display dhcp relay client-information
reset dhcp relay statistics
Use reset dhcp relay statistics to clear relay agent statistics.
Syntax
reset dhcp relay statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Clears DHCP relay agent statistics on the specified
interface. If you do not specify an interface, this command clears all DHCP relay agent statistics.
Examples
# Clear all DHCP relay agent statistics.
<Sysname> reset dhcp relay statistics
Related commands
display dhcp relay statistics
DHCP client commands
dhcp client dad enable
Use dhcp client dad enable to enable duplicate address detection.
Use undo dhcp client dad enable to disable duplicate address detection.
Syntax
dhcp client dad enable
undo dhcp client dad enable
Default
Duplicate address detection is enabled on an interface.

HPE 5920 series Specifications

General

Brand	HPE
Model	5920 series
Category	Switch
Language	English