HPE 5920 series

186
<Sysname> display ipv6 pathmtu all count
Total number of entries: 3
Table 46 Command output
Field
Description
PathMTU Path MTU value on the network path to an IPv6 address.
Age
Time for a Path MTU to live. For a static Path MTU, this field displays a
hyphen (-).
Type
Indicates that the Path MTU is dynamically negotiated or statically
configured.
Total number of entries Total number of Path MTU entries.
Related commands
ipv6 pathmtu
reset ipv6 pathmtu
display ipv6 prefix
Use display ipv6 prefix to display information about dynamic and static IPv6 prefixes.
Syntax
display ipv6 prefix [ prefix-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
prefix-number: Specifies the ID of an IPv6 prefix, in the range of 1 to 1024. If this argument is not
specified, the command displays information about all IPv6 prefixes.
Usage guidelines
A static IPv6 prefix is configured by using the ipv6 prefix command.
A dynamic IPv6 prefix is obtained from the DHCPv6 server, and its prefix ID is configured by using
the ipv6 dhcp client pd command.
Examples
# Display information about all IPv6 prefixes.
<Sysname> display ipv6 prefix
Number Prefix Type
1 1::/16 Static
2 11:77::/32 Dynamic
# Display information about the IPv6 prefix with prefix ID 1.
<Sysname> display ipv6 prefix 1
Number: 1
Type : Dynamic