HPE 5920 series

287
Predefined user roles
network-admin
Usage guidelines
IPv6 fast-forwarding load sharing enables the device to identify a data flow by using the five-tuple
(source IP, source port, destination IP, destination port, and protocol). The device then forwards
packets of the same flow to implement load sharing.
If IPv6 fast-forwarding load sharing is disabled, the device identifies a data flow by the five-tuple and
the input interface. No load sharing is implemented.
Examples
# Enable IPv6 fast-forwarding load sharing.
<Sysname> system-Views
[Sysname] ipv6 fast-forwarding load-sharing
reset ipv6 fast-forwarding cache
Use reset ipv6 fast-forwarding cache to clear IPv6 fast forwarding table information.
Syntax
reset ipv6 fast-forwarding cache [ slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number. If you do not specify this option, the command clears the IPv6 fast forwarding table
information on all parent devices and PEXs.
Examples
# Clear IPv6 fast forwarding table information.
<Sysname> reset ipv6 fast-forwarding cache
Related commands
display ipv6 fast-forwarding cache