HPE 5920 series

59
If you use this command to clear information about an assigned static binding, the static binding
becomes an unassigned static binding.
Examples
# Clear binding information about the IP address 10.110.1.1.
<Sysname> reset dhcp server ip-in-use ip 10.110.1.1
Related commands
display dhcp server ip-in-use
reset dhcp server statistics
Use reset dhcp server statistics to clear DHCP server statistics.
Syntax
reset dhcp server statistics
Views
User view
Predefined user roles
network-admin
Examples
# Clear DHCP server statistics.
<Sysname> reset dhcp server statistics
Related commands
display dhcp server statistics
static-bind
Use static-bind to statically bind a client ID or MAC address to an IP address.
Use undo static-bind to remove a static binding.
Syntax
static-bind ip-address ip-address [ mask-length | mask mask ] { client-identifier client-identifier |
hardware-address hardware-address [ ethernet | token-ring ] }
undo static-bind ip-address ip-address
Default
No static binding is specified in a DHCP address pool.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
ip-address ip-address: Specifies the IP address of the static binding. The natural mask is used if no
mask length or mask is specified.
mask-length: Specifies the mask length in the range of 1 to 30.
mask mask: Specifies the mask, in dotted decimal format.