284
IPv6 fast forwarding commands
display ipv6 fast-forwarding aging-time
Use display ipv6 fast-forwarding aging-time to display the aging time of IPv6 fast forwarding
entries.
Syntax
display ipv6 fast-forwarding aging-time
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the aging time of IPv6 fast forwarding entries.
<Sysname> display ipv6 fast-forwarding aging-time
Aging time: 30s
Table 68 Command output
Field Description
Aging time Aging time of IPv6 fast forwarding entries.
Related commands
ipv6 fast-forwarding aging-time
display ipv6 fast-forwarding cache
Use display ipv6 fast-forwarding cache to display IPv6 fast forwarding table information.
Syntax
display ipv6 fast-forwarding cache [ ipv6-address ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-address: Specifies an IPv6 address. If you do not specify an IPv6 address, this command
displays all IPv6 fast forwarding entries.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number. If you do not specify this option, the command displays IPv6 fast forwarding entries on all
parent devices and PEXs.
To Next Page
Loading...
Need help?
General