234
Syntax
display ipv6 dhcp prefix-pool [ prefix-pool-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
prefix-pool-number: Displays detailed information about a prefix pool specified by its number in the
range of 1 to 128. If you do not specify a prefix pool, this command displays brief information about
all prefix pools.
Examples
# Display brief information about all prefix pools.
<Sysname> display ipv6 dhcp prefix-pool
Prefix-pool Prefix Available In-use Static
1 5::/64 64 0 0
# Display detailed information about prefix pool 1.
<Sysname> display ipv6 dhcp prefix-pool 1
Prefix: 5::/64
Assigned length: 70
Total prefix number: 64
Available: 64
In-use: 0
Static: 0
Table 55 Command output
Prefix-pool Prefix pool number.
Prefix Prefix specified in the prefix pool.
Available Number of available prefixes.
In-use Number of assigned prefixes.
Static Number of statically bound prefixes.
Assigned length Length of assigned prefixes.
Total prefix number Number of prefixes.
display ipv6 dhcp server
Use display ipv6 dhcp server to display DHCPv6 server configuration information.
Syntax
display ipv6 dhcp server [ interface interface-type interface-number ]
Views
Any view
To Next Page
Loading...
Need help?
General