HPE 5920 series

61
Usage guidelines
If you use this command multiple times, the most recent configuration takes effect.
Examples
# Specify the TFTP server name aaa in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] tftp-server domain-name aaa
Related commands
display dhcp server pool
tftp-server ip-address
tftp-server ip-address
Use tftp-server ip-address to specify a TFTP server address in a DHCP address pool.
Use undo tftp-server ip-address to remove the TFTP server address from a DHCP address pool.
Syntax
tftp-server ip-address ip-address
undo tftp-server ip-address
Default
No TFTP server address is specified.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address of a TFTP server.
Usage guidelines
If you use this command multiple times, the most recent configuration takes effect.
Examples
# Specify the TFTP server address 10.1.1.1 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] tftp-server ip-address 10.1.1.1
Related commands
display dhcp server pool
tftp-server domain-name
voice-config
Use voice-config to configure the content for Option 184 in a DHCP address pool.
Use undo voice-config to remove the Option 184 content from a DHCP address pool.