HPE 5920 series

181
Lifetime(Valid/Preferred): 3000/2000
Prefix: 3001::/64 Origin: RA
Age: 600 Flag: A
Lifetime(Valid/Preferred): -
Table 43 Command output
Filed
Description
Prefix IPv6 address prefix.
Origin
How the prefix is generated:
• STATIC—Manually configured by using the ipv6 nd ra prefix command.
• RA—Advertised in RA messages after stateless autoconfiguration is enabled.
• ADDRESS—Generated by a manually configured address.
Age Aging time in seconds. If the prefix does not age out, this field displays a hyphen (-).
Flag
Flags advertised in RA messages. If no flags are available, this field displays a hyphen
(-).
• L—The address with the prefix is directly reachable on the link.
• A—The prefix is used for stateless autoconfiguration.
Lifetime
Lifetime in seconds advertised in RA messages. If the prefix does not need to be
advertised, this field displays a hyphen (-).
• Valid—Valid lifetime of the prefix.
• Preferred—Preferred lifetime of the prefix.
Related commands
ipv6 nd ra prefix
display ipv6 neighbors
Use display ipv6 neighbors to display IPv6 neighbor information.
Syntax
display ipv6 neighbors { { ipv6-address | all | dynamic | static } [ slot slot-number ] | interface
interface-type interface-number | vlan vlan-id } [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-address: Specifies the IPv6 address of a neighbor whose information is displayed.
all: Displays information about all neighbors, including neighbors acquired dynamically and
configured statically on the public network and all private networks.
dynamic: Displays information about all neighbors acquired dynamically.
static: Displays information about all neighbors configured statically.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number.