HPE 5920 series

8
192.168.0.115 000d-88f7-9f7d 1 XGE1/0/2 18 D
[No Vrf]
192.168.0.39 0012-a990-2241 1 XGE1/0/3 20 D
[No Vrf]
22.1.1.1 000c-299d-c041 10 N/A N/A M
[No Vrf]
# Display the number of all ARP entries.
<Sysname> display arp all count
Total number of entries : 5
Table 1 Command output
Field
Description
IP Address IP address in an ARP entry.
MAC Address MAC address in an ARP entry.
VLAN
ID of the VLAN to which the ARP entry belongs. This field displays
N/A
in
either of the following situations:
• The ARP entry is an unresolved short static ARP entry.
• The output interface of the ARP entry does not belong to the VLAN.
Interface
Output interface in an ARP entry. This field displays
N/A
in either of the
following situations:
• The ARP entry is an unresolved short static ARP entry.
• The ARP entry is a multiport ARP entry and has no output interface
information.
To obtain the output interface information of the multiport ARP entry, look
up the MAC address table according to the MAC address in the ARP
entry.
Aging
Aging time for a dynamic ARP entry in minutes.
N/A
means unknown aging
time or no aging time.
Type
ARP entry type:
• D—Dynamic.
• S—Static.
• O—OpenFlow.
• M—Multiport.
• I—Invalid.
Vpn Instance
Name of VPN instance.
[No Vrf]
is displayed if no VPN instance is configured
for the ARP entry.
Total number of entries Number of ARP entries.
Related commands
arp static
reset arp
display arp ip-address
Use display arp ip-address to display the ARP entry for an IP address.
Syntax
display arp ip-address [ slot slot-number ] [ verbose ]