HPE 5920 series

133
Fast forwarding commands
display ip fast-forwarding aging-time
Use display ip fast-forwarding aging-time to display the aging time of fast forwarding entries.
Syntax
display ip fast-forwarding aging-time
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the aging time of fast forwarding entries.
<Sysname> display ip fast-forwarding aging-time
Aging time: 30s
Related commands
ip fast-forwarding aging-time
display ip fast-forwarding cache
Use display ip fast-forwarding cache to display fast forwarding table information.
Syntax
display ip fast-forwarding cache [ ip-address ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ip-address: Specifies an IP address. If you do not specify the ip-address argument, this command
displays all fast forwarding entries.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number. If you do not specify this option on an IRF fabric, the command displays fast forwarding
entries on all member devices. If you do not specify this option on an eIRF system, the command
displays fast forwarding entries on all parent devices and PEXs.
Usage guidelines
This command displays fast forwarding entries. Each entry includes the source IP address, source
port number, destination IP address, destination port number, protocol number, input and output
interfaces, and internal tag of a data flow.