190
and RawIP support this flag.
• IN6P_IPV6_V6ONLY—Only supports IPv6 protocol stack.
• IN6P_PKTINFO—Receives the source IPv6 address and input
interface of the packet.
• IN6P_HOPLIMIT—Receives the hop limit.
• IN6P_HOPOPTS—Receives the hop-by-hop options extension
header.
• IN6P_DSTOPTS—Receives the destination options extension header.
• IN6P_RTHDR—Receives the routing extension header.
• IN6P_RTHDRDSTOPTS—Receives the destination options extension
header preceding the routing extension header.
• IN6P_TCLASS—Receives the traffic class of the packet.
• IN6P_AUTOFLOWLABEL—Attaches a flow label automatically.
• IN6P_RFC2292—Uses the API specified in RFC 2292.
• IN6P_MTU—Discovers differences in the MTU size of every link along
a given data path. TCP does not support this flag.
• INP_RCVMACADDR—Receives the MAC address of the frame.
• INP_USEICMPSRC—Uses the specified IPv6 address as the source
IPv6 address for outgoing ICMP packets.
• INP_SYNCPCB—Waits until Internet PCB is synchronized.
• N/A—None of the above flags.
Inpcb vflag
IP version flag in the Internet PCB:
• INP_IPV4—IPv4 protocol.
• INP_IPV6—IPv6 protocol.
• INP_IPV6PROTO—Creates an Internet PCB based on IPv6 protocol.
• INP_TIMEWAIT—In TIMEWAIT state.
• INP_ONESBCAST—Sends broadcast packets.
• INP_DROPPED—Protocol dropped flag.
• INP_SOCKREF—Strong socket reference.
• INP_DONTBLOCK—Do not block synchronization of the Internet PCB.
• N/A—None of the above flags.
Hop limit(minimum hop limit)
Hop limit in the Internet PCB. The minimum number of hops is displayed in
the parentheses.
Send VRF Sent instances.
Receive VRF Received instances.
display ipv6 statistics
Use display ipv6 statistics to display IPv6 and ICMPv6 packet statistics.
Syntax
display ipv6 statistics [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
To Next Page
Loading...
Need help?
General