74
Strategy: Replace
Circuit ID Pattern: Verbose
Remote ID Pattern: Sysname
Circuit ID format-type: Undefined
Remote ID format-type: ASCII
Node identifier: aabbcc
Interface: Vlan-interface200
Status: Enable
Strategy: Replace
Circuit ID Pattern: User Defined
Remote ID Pattern: User Defined
Circuit ID format-type: ASCII
Remote ID format-type: ASCII
User defined:
Circuit ID: vlan100
Remote ID: device001
Table 14 Command output
Interface Interface name.
Status
Option 82 states:
• Enable—DHCP relay agent support for Option 82 is enabled.
• Disable—DHCP relay agent support for Option 82 is disabled.
Strategy
Handling strategy for request messages containing Option 82,
Drop
,
Keep
, or
Replace
.
Circuit ID Pattern
Padding content mode of the Circuit ID sub-option,
Verbose
,
Normal
, or
User
Defined
.
Remote ID Pattern
Padding content mode of the Remote ID sub-option,
Sysname
,
Normal
,
or
User
Defined
.
Circuit ID format-type
Padding format of the Circuit ID sub-option,
ASCII
,
Hex
,
or
Undefined
.
Remote ID format-type
Padding format of the Remote ID sub-option,
ASCII
,
Hex
,
or
Undefined
.
Node identifier Access node identifier.
User defined Content of the user-defined sub-options.
Circuit ID User-defined content of the Circuit ID sub-option.
Remote ID User-defined content of the Remote ID sub-option.
display dhcp relay server-address
Use display dhcp relay server-address to display DHCP server addresses configured on an
interface.
Syntax
display dhcp relay server-address [ interface interface-type interface-number ]
Views
Any view
To Next Page
Loading...
Need help?
General