HPE 5920 series

146
Table 33 Command output
Field
Description
Local Addr Local IP address.
Foreign Addr Peer IP address.
Protocol Protocol number.
Slot ID of the IRF member device.
PCB Protocol control block.
display rawip verbose
Use display rawip verbose to display detailed information about RawIP connections.
Syntax
display rawip verbose [ slot slot-number [ pcb pcb-index ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pcb pcb-index: Specifies a PCB by its index in the range of 1 to 16.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number.
Usage guidelines
Use the display rawip verbose command to display detailed information about socket creator,
state, option, type, protocol number, and the source and destination IP addresses of RawIP
connections.
Examples
# Display detailed information about RawIP connections.
<Sysname> display rawip verbose
Total RawIP socket number: 1
Slot: 6
Creator: ping[320]
State: N/A
Options: N/A
Error: 0
Receiving buffer(cc/hiwat/lowat/state): 0 / 9216 / 1 / N/A
Sending buffer(cc/hiwat/lowat/state): 0 / 9216 / 512 / N/A
Type: 3
Protocol: 1
Connection info: src = 0.0.0.0, dst = 0.0.0.0
Inpcb flags: N/A
Inpcb vflag: INP_IPV4