264
Length Self-defined option length in bytes.
Hex Self-defined option content represented by a hexadecimal string.
Related commands
ipv6 address dhcp-alloc
ipv6 dhcp client pd
display ipv6 dhcp client statistics
Use display ipv6 dhcp client statistics to display DHCPv6 client statistics.
Syntax
display ipv6 dhcp client statistics [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface, this command displays statistics for all DHCPv6 clients.
Examples
# Display DHCPv6 client statistics on VLAN-interface 2.
<Sysname> display ipv6 dhcp client statistics interface vlan-interface 2
Interface : Vlan-interface2
Packets received : 1
Reply : 1
Advertise : 0
Reconfigure : 0
Invalid : 0
Packets sent : 5
Solicit : 0
Request : 0
Renew : 0
Rebind : 0
Information-request : 5
Release : 0
Decline : 0
Table 65 Command output
Interface Interface that acts as the DHCPv6 client.
Packets Received Number of received packets.
To Next Page
Loading...
Need help?
General