HPE 5920 series

15
Proxy ARP commands
display local-proxy-arp
Use display local-proxy-arp to display the local proxy ARP status.
Syntax
display local-proxy-arp [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays the local proxy ARP status for the specified
interface.
Usage guidelines
You can use this command to check whether local proxy ARP is enabled or disabled.
If an interface is specified, this command displays the local proxy ARP status for the specified
interface.
If no interface is specified, this command displays the local proxy ARP status for all interfaces.
Examples
# Display the local proxy ARP status for VLAN-interface 2.
<Sysname> display local-proxy-arp interface vlan-interface 2
Interface Vlan-interface2
Local Proxy ARP status: enabled
Related commands
local-proxy-arp enable
display proxy-arp
Use display proxy-arp to display the proxy ARP status.
Syntax
display proxy-arp [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays the proxy ARP status for the specified interface.