HPE 5920 series

265
Field
Description
Reply Number of received reply packets.
Advertise Number of received advertise packets.
Reconfigure Number of received reconfigure packets.
Invalid Number of invalid packets.
Packets sent Number of sent packets.
Solicit Number of sent solicit packets.
Request Number of sent request packets.
Renew Number of sent renew packets.
Rebind Number of sent rebind packets.
Information-request Number of sent information request packets.
Release Number of sent release packets.
Decline Number of sent decline packets.
Related commands
reset ipv6 dhcp client statistics
ipv6 address dhcp-alloc
Use ipv6 address dhcp-alloc to configure an interface to use DHCPv6 for IPv6 address acquisition.
Use undo ipv6 address dhcp-alloc to cancel an interface from using DHCPv6, and clear the
obtained IPv6 address and other configuration parameters.
Syntax
ipv6 address dhcp-alloc [ rapid-commit ]
undo ipv6 address dhcp-alloc
Default
An interface does not use DHCPv6 for IPv6 address acquisition.
Views
Layer 3 Ethernet interface/subinterface view
Layer 3 aggregate interface/subinterface view
Management Ethernet interface view
VLAN interface view
Predefined user roles
network-admin
Parameters
rapid-commit: Supports rapid address or prefix assignment.
Examples
# Configure VLAN-interface 10 to use DHCPv6 for IPv6 address acquisition. Configure the DHCPv6
client to support rapid address assignment.
<Sysname> system-view