HPE 5920 series

127
192.168.0.0/32 192.168.0.63 UBH M-GE0/0/0 Null
192.168.0.2/32 192.168.0.2 UH M-GE0/0/0 Null
192.168.0.3/32 192.168.0.3 UH M-GE0/0/0 Null
# Display the FIB entries for VPN vpn1.
<Sysname> display fib vpn-instance vpn1
Destination count: 8 FIB entry count: 8
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
R:Relay F:FRR
Destination/Mask Nexthop Flag OutInterface/Token Label
0.0.0.0/32 127.0.0.1 UH InLoop0 Null
20.20.20.0/24 20.20.20.25 U XGE1/0/2 Null
20.20.20.0/32 20.20.20.25 UBH XGE1/0/2 Null
20.20.20.25/32 127.0.0.1 UH InLoop0 Null
20.20.20.25/32 20.20.20.25 H XGE1/0/2 Null
20.20.20.255/32 20.20.20.25 UBH XGE1/0/2 Null
30.30.30.0/24 30.30.30.30 U XGE1/0/2 Null
30.30.30.0/32 30.30.30.30 UBH XGE1/0/8 Null
# Display the FIB entries matching the destination IP address 10.2.1.1.
<Sysname> display fib 10.2.1.1
Destination count: 1 FIB entry count: 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
R:Relay F:FRR
Destination/Mask Nexthop Flag OutInterface/Token Label
10.2.1.1/32 127.0.0.1 UH InLoop0 Null
Table 28 Command output
Field
Description
Destination count Total number of destination addresses.
FIB entry count Total number of FIB entries.
Destination/Mask Destination address/mask length.
Nexthop Next hop address.
Flag
Flags of routes:
• U—Usable route.
• G—Gateway route.
• H—Host route.
• B—Blackhole route.
• D—Dynamic route.
• S—Static route.
• R—Relay route.
• F—Fast reroute.