HPE 5920 series

47
DHCPDISCOVER: 5
DHCPREQUEST: 3
DHCPDECLINE: 0
DHCPRELEASE: 2
DHCPINFORM: 0
BOOTPREQUEST: 0
Messages sent: 6
DHCPOFFER: 3
DHCPACK: 3
DHCPNAK: 0
BOOTPREPLY: 0
Bad Messages: 0
Table 10 Command output
Field
Description
Pool number
Total number of address pools. This field is not displayed when you
display statistics for a specific address pool.
Pool utilization
Pool utilization rate:
• If you display statistics for all address pools, this field displays the
utilization rate of all address pools.
• If you display statistics for an address pool, this field displays the
pool utilization rate of the specified address pool.
Bindings
Bindings include the following types:
• Automatic—Number of dynamic bindings.
• Manual—Number of static bindings.
• Expired—Number of expired bindings.
Conflict
Total number of conflict addresses. This field is not displayed if you
display statistics for a specific address pool.
Messages received
DHCP packets received from clients:
• DHCPDISCOVER.
• DHCPREQUEST.
• DHCPDECLINE.
• DHCPRELEASE.
• DHCPINFORM.
• BOOTPREQUEST.
This field is not displayed if you display statistics for a specific address
pool.
Messages sent
DHCP packets sent to clients:
• DHCPOFFER.
• DHCPACK.
• DHCPNAK.
• BOOTPREPLY.
This field is not displayed if statistics about a specific address pool are
displayed.
Bad Messages
Number of bad messages. This field is not displayed if you display
statistics for a specific address pool.
Related commands
reset dhcp server statistics