HPE FlexNetwork 5130 EI Series Fundamentals Configuration Guide

105
Task Command Remarks
Delete next-startup configuration
files.
reset saved-configuration
[
backup
|
main
]
If neither
backup
nor
main
is
specified, this command deletes
the main next-startup
configuration file.
Displaying and maintaining configuration files
Execute display commands in any view.
Task Command
Display information about configuration
rollback.
display archive configuration
Display the running configuration.
display current-configuration
[
configuration
[ module-name ] |
interface
[ interface-type
[ interface-number ] ] ]
Display the configuration differences
between the running configuration and the
next-startup configuration file.
display current-configuration diff
Display the factory defaults.
display default-configuration
Display the configuration differences
between two configuration files or between a
configuration file and the running
configuration.
• display diff configfile file-name-s { configfile
file-name-d | current-configuration |
startup-configuration }
• display diff current-configuration { configfile
file-name-d | startup-configuration }
• display diff startup-configuration { configfile
file-name-d | current-configuration }
Display the contents of the configuration file
for the next system startup.
display saved-configuration
Display the names of the configuration files
for this startup and the next startup.
display startup
Display the valid configuration in the current
view.
display this

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English