HPE FlexNetwork 5130 EI Series Fundamentals Configuration Guide

84
Task Command Remarks
Display or change the local
working directory of the FTP
client.
lcd
[ directory | / ]
N/A
Upload a file to the FTP server.
put
localfile [ remotefile ]
N/A
Download a file from the FTP
server.
get
remotefile [ localfile ]
N/A
Add the content of a file on the
FTP client to a file on the FTP
server.
append
localfile [ remotefile ] N/A
Specify the retransmit marker.
restart
marker
Use this command together with
the
put
,
get
, or
append
command.
Update the local file.
newer
remotefile N/A
Get the missing part of a file.
reget
remotefile [ localfile ] N/A
Rename the file.
rename
[ oldfilename [ newfilename ] ] N/A
Changing to another user account
After you log in to the FTP server, you can change to another user account to get a different privilege
without reestablishing the FTP connection. You must correctly enter the new username and
password. A wrong username or password can cause the FTP connection to disconnect.
To change to another user account, execute the following command in user view:
Task Command
Change to another user account.
user
username [ password ]
Maintaining and troubleshooting the FTP connection
Task Command Remarks
Display FTP commands on the FTP
server.
rhelp
N/A
Display FTP commands help
information on the FTP server.
rhelp
protocol-command N/A
Display FTP server status.
rstatus
N/A
Display detailed information about a
directory or file on the FTP server.
rstatus
remotefile N/A
Display FTP connection status.
status
N/A
Display the system information of the
FTP server.
system
N/A
Enable or disable FTP operation
information display.
verbose
By default, this function is enabled.
Enable or disable FTP client
debugging.
debug
By default, FTP client debugging is
disabled.
Clear the reply information in the buffer.
reset
N/A

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English