HPE FlexNetwork 5130 EI Series Fundamentals Configuration Guide

110
Step Command Remarks
feature-package&<1-30> ]
slot slot-number { backup |
main }
•
If method 1 is used, the file name
must use the
storage-medium:/base-filename.
ipe format, for example,
flash:/startup.ipe.
• If method 2 is used, all file names
must use the
storage-medium:/base-filename.
bin format, for example,
flash:/startup-boot.bin.
2. Specify main startup
images for each
subordinate device.
• Method 1 Use an .ipe file for
upgrade:
boot-loader file
ipe-filename {slot
slot-number } { backup |
main }
• Method 1 Use .bin files for
upgrade:
boot-loader file boot
boot-package system
system-package [ feature
feature-package&<1-30> ]
slot slot-number { backup |
main }
• Method 2:
boot-loader update slot
slot-number
Skip this step if you have only one
device.
When you use method 2, make sure
you understand the following
requirements and upgrade results:
• If the master device started up
with main startup images, its
main startup images are
synchronized to the subordinate
devices. This synchronization
occurs regardless of whether
any change has occurred to this
set of startup images.
• If the master device has started
up with backup startup images,
its backup startup images are
synchronized to the subordinate
devices. This synchronization
occurs regardless of whether
any change has occurred to this
set of startup images.
• Startup image synchronization
will fail if any software image
being synchronized is corrupted
or is not available.
3. Save the running
configuration.
save
This step makes sure any
configuration you have made can
survive a reboot.
4. Reboot the IRF fabric.
reboot
At startup, each device reads the
preloaded Boot ROM image to RAM,
and loads the startup images.
5. (Optional.) Verify the
software image settings.
display boot-loader
[
slot
slot-number ]
Verify that the current software
images are the same as the startup
software images.
Displaying and maintaining software image
settings
Execute display commands in any view.
Task Command
Display current software images and startup
software images.
display boot-loader
[
slot
slot-number ]

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English