131
After this operation, only the items required for device operation are retained, including the .bin files,
the MAC addresses, and the electronic label information.
To restore the factory-default settings and states, use the following command in user view:
Task Command Remarks
Restore the factory-default settings
and states.
restore factory-default
This command takes effect after a
device reboot.
Displaying and maintaining device management
configuration
Execute display commands in any view and reset commands in user view.
Task Command
Display the system time, date, local time zone,
and daylight saving time.
display clock
Display the copyright statement.
display copyright
Display CPU usage statistics.
display cpu-usage
[
slot
slot-number [
cpu
cpu-number ] ]
Display CPU usage monitoring settings.
display cpu-usage configuration
[
slot
slot-number
[
cpu
cpu-number ] ]
Display historical CPU usage statistics in a chart.
display cpu-usage history
[
job
job-id ]
[
slot
slot-number [
cpu
cpu-number ] ]
Display hardware information.
display device
[
slot
slot-number |
verbose
]
Display the electronic label information of the
device.
display device manuinfo
[
slot
slot-number ]
Display the electronic label information of a
power supply. (Available only on the HPE
FlexNetwork 5130 24G SFP 4SFP+ EI Switch,
JG933A.)
display device manuinfo slot
slot-number
power
power-id
Display the operating statistics for multiple
feature modules.
display diagnostic-information
[
hardware
|
infrastructure
|
l2
|
l3
|
service
] [ filename ]
Display device temperature statistics.
display environment
[
slot
slot-number ]
Display the operating states of fans.
display fan
[
slot
slot-number [ fan-id ]
]
Display memory usage statistics.
display memory
[
slot
slot-number [
cpu
cpu-number ] ]
Display memory usage thresholds.
display memory-threshold
[
slot
slot-number [
cpu
cpu-number ] ]
Display power supply information.
display power
[
slot
slot-number [ power-id ] ]
Display job configuration information.
display scheduler job
[ job-name
]
Display job execution log information.
display scheduler logfile
Display the automatic reboot schedule.
display scheduler reboot