HPE FlexNetwork 5130 EI Series Fundamentals Configuration Guide

122
Step Command Remarks
8. Specify an execution
time table for the
non-periodic schedule.
• Specify the execution date and
time:
time at time date
• Specify the execution days and
time:
time once at time [ month-date
month-day | week-day
week-day&<1-7> ]
• Specify the execution delay
time:
time once delay time
Configure one command as
required.
By default, no execution time is
specified for a schedule.
Executing commands
clock
datetime
,
clock summer-time
,
and
clock timezone
does not
change the execution time table
that is already configured for a
schedule.
To configure a periodic schedule for the device:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Create a job.
scheduler job
job-name By default, no job exists.
3. Assign a command to
the job.
command
id command
By default, no command is
assigned to a job.
You can assign multiple commands
to a job. A job with a smaller ID will
be executed first.
4. Exit system view.
quit
N/A
5. Create a schedule.
scheduler schedule
schedule-name By default, no schedule exists.
6. Assign user roles to the
schedule.
user-role
role-name
By default, a schedule has the user
roles of the schedule creator.
7. Assign a job to a
schedule.
job
job-name
By default, no job is assigned to a
schedule.
You can assign multiple jobs to a
schedule. The jobs will be executed
concurrently.
8. Specify an execution
time table for the
periodic schedule.
• Execute the schedule at an
interval from the specified time
on:
time repeating at time
[ month-date [ month-day |
last ] | week-day
week-day&<1-7> ]
• Execute the schedule at the
specified time on every specified
day in a month or week:
time repeating [ at time [date ] ]
interval interval-time
Configure either command.
By default, no execution time is
specified for a schedule.
Executing commands
clock
datetime
,
clock summer-time
,
and
clock timezone
does not
change the execution time table
that is already configured for a
schedule.
Schedule configuration example
Network requirements
As shown in Figure 36, two interfaces of the device are connected to users.
To save energy, configure the device to perform the following tasks:

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English