113
Task Command Remarks
Format a storage
medium.
format
storage-medium
N/A
Loading the system image
Use this task to load a system image from a local storage medium. When you load the system image,
the system modifies the main startup software image set to include only the boot image and system
image. The modification can survive a device reboot.
To load the system image, execute the following command in user view:
Task Command
Load a system image.
install
load
system-package
Rebooting the device
To reboot the device, execute the following command in user view:
Task Command
Reboot the current member device.
reboot
Displaying device information in emergency shell
mode
Execute display commands in any view.
Task Command
Display copyright information.
display copyright
Display software package information.
display install package
package
Display boot image version information.
display version
Emergency shell usage example
Network requirements
The device has only the boot image. The device and PC can reach each other.
Load a system image for the device after the device enters emergency shell mode.
Usage procedure
# Display current software images and startup software images.
<System>display boot-loader
To Next Page
Loading...
Need help?
General