HPE FlexNetwork 5130 EI Series Fundamentals Configuration Guide

114
Software images on slot 1:
Current software images:
flash:/5130ei-cmw710-boot-r3111p02.bin
flash:/5130ei-cmw710-system-r3111p02.bin
Main startup software images:
flash:/5130ei-cmw710-boot-r3111p02.bin
flash:/5130ei-cmw710-system-r3111p02.bin
Backup startup software images:
None
# Identify which files are stored and how much space is available on the storage medium of the
device.
<System>dir
Directory of flash:
0 -rw- 104833 Jan 01 2011 05:46:24 startup.mdb
1 drw- - Jan 03 2011 03:33:27 versionInfo
2 -rw- 5341 Jan 01 2011 05:46:24 startup.cfg
3 -rw- 36640 Jan 03 2011 03:26:14 5130ei-cmw710-boot-r3111p02.bin
4 -rw- 3707 Jan 01 2011 01:26:51 startup.cfg_bak
5 drw- - Jan 01 2011 00:00:24 seclog
6 drw- - Jan 01 2011 00:00:24 diagfile
7 drw- - Jan 01 2011 00:12:20 logfile
8 -rw- 203 Jan 01 2011 05:28:14 lauth.dat
9 -rw- 36146 Jan 01 2011 05:46:24 5130ei-cmw710-system-r3111p02.bin
524288 KB total (147072 KB free)
The output shows that the boot image is present but the system image is not. The available space is
147072 KB.
# Reboot the device.
The device enters emergency shell mode.
# Identify whether the version of the system image to be loaded matches that of the current boot
image.
<boot> display install package flash:/5130ei-cmw710-system-r3111p02.bin
flash:/5130ei-cmw710-system-r3111p02.bin
[Package]
Vendor: HPE
Product: S5X30
Service name: system
Platform version: 7.1.045
Product version: Release 3111P02
Supported board: mpu
# Load the system image to start the Comware system.
<boot> install load flash:/5130ei-cmw710-system-r3111p02.bin
Check package flash:/5130ei-cmw710-system-r3111p02.bin ...
Extracting package ...
Loading...
Line aux0 is available.

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English