To Next Page

To Previous Page

136

Figure 38 Network diagram

Configuration procedure

# Use a text editor on the PC to edit Python script test.py as follows:

#!usr/bin/python

import comware

comware.Transfer('tftp', '192.168.1.26', 'main.cfg', 'flash:/main.cfg')

comware.Transfer('tftp', '192.168.1.26', 'backup.cfg', 'flash:/backup.cfg')

comware.CLI('startup saved-configuration flash:/main.cfg main ;startup

saved-configuration flash:/backup.cfg backup')

# Use TFTP to download the script to the device.

<Sysname> tftp 192.168.1.26 get test.py

# Execute the script.

<Sysname> python flash:/test.py

<Sysname>startup saved-configuration flash:/main.cfg main

Please wait...... Done.

<Sysname>startup saved-configuration flash:/backup.cfg backup

Please wait...... Done.

Verifying the configuration

# Display startup configuration files.

<Sysname> display startup

Current startup saved-configuration file: flash:/startup.cfg

Next main startup saved-configuration file: flash:/main.cfg

Next backup startup saved-configuration file: flash:/backup.cfg

HPE FlexNetwork 5130 EI Series Fundamentals Configuration Guide

Other manuals for HPE FlexNetwork 5130 EI Series