9. Insert the battery with the "+" side facing up on the socket, and then press the battery down to secure it in place.
10.
Install the access panel.
11.
Install the server into the rack.
12.
Connect all peripheral cables to the server.
13.
Connect each power cord to the server.
14.
Connect each power cord to the power source.
15.
Power up the server.
16. If removed, install the bezel.
17. Properly dispose of the old battery.
For more information about battery replacement or proper disposal, contact an authorized reseller or support
specialist.
System battery replacement
137
To Next Page
Loading...
