14. Connect the ODD cable.
15.
Do one of the following:
•
Install the inner drive cage.
• Install the inner drive cage blank.
16.
Install the access panel.
17.
Install the inner rack rails.
18.
Install the server into the rack.
19.
Connect all peripheral cables to the server.
20.
Connect each power cord to the server.
21.
Connect each power cord to the power source.
22.
Power up the server.
23.
If removed,
install the bezel.
The installation is complete.
Fan option
Fan population
All configurations support fan redundancy.
Hardware options installation
97
To Next Page
Loading...
