HPE ProLiant DL325 Gen10 Plus

Mechanical specifications
Specification Value
Height 428 cm (169 in)
Depth
– Short Chassis (two cages) 8262 cm (3252 in)
– Long Chassis (three cages) 10088 cm (3971 in)
Width 4346 cm (1711 in)
Weight (approximate range)
– Short Chassis (two cages) 170 kg to 260 kg (3748 lb to 5732 lb)
– Long Chassis (three cages) 200 kg to 320 kg (4409 lb to 7055 lb)
Power supply specifications
Depending on the installed options and the regional location where the server was purchased, the server can be
configured with one of the following power supplies:
• HPE 500W Flex Slot Platinum Hot-plug Low Halogen Power Supply
• HPE 800W Flex Slot Platinum Hot-plug Low Halogen Power Supply
•
HPE 800W Flex Slot Titanium Hot-plug Low Halogen Power Supply
• HPE 800W Flex Slot Universal Hot-plug Low Halogen Power Supply
• HPE 800W Flex Slot -48VDC Hot-plug Low Halogen Power Supply
•
HPE 1600W Flex Slot Platinum Hot-plug Low Halogen Power Supply
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise website.
HPE 500W Flex Slot Platinum Hot-plug Low Halogen Power Supply
Specification
Value
Input requirements
—
Rated input voltage
100 VAC to 240 VAC
240 VDC for China only
Rated input frequency
50 Hz to 60 Hz
Not applicable to 240 VDC
Rated input current
56 A at 100 VAC
27 A at 200 VAC
23 A at 240 VDC for China only
Table Continued
140 Specifications