Item Description Status
3 Health LED
Solid green = Normal
Flashing green (1 flash per second) = iLO is rebooting
Flashing amber = System degraded
1
Flashing red (1 flash per second) = System critical
1
4 Power On/Standby button and
system power LED
Solid green = System on
Flashing green (1 flash per second) = Performing power on
sequence
Solid amber = System in standby
O = No power present
2
1
If the health LED indicates a degraded or critical state, review the system Integrated Management Log (IML) or use HPE iLO to review
the system health status.
2
If the system power LED is o, verify the following conditions:
• Facility power is present.
• The power supply is installed and is working correctly.
• The power cord is attached and is connected to a power source.
• The front I/O cable is connected.
If all LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see "Power fault
LEDs".
SFF drive model
Component identification
9
To Next Page
Loading...
