CAUTION: Always plan the rack installation so that the heaviest item is on the bottom of the rack. Install the
heaviest item first, and continue to populate the rack from the bottom to the top.
Procedure
1. Install the rack rail option.
For more information, see Installation Instructions on the Hewlett Packard Enterprise website.
2. Install the server into the rack:
a. Align the inner rails of the server with the outer rails.
b. Slide the server into the rack until the quick-release latches engage with the front columns of the rack.
c.
Open the latches and tighten the shipping screws, if necessary.
3. Connect peripheral devices to the server.
For information on identifying connectors, see Rear panel components.
62
Setup
To Next Page
Loading...
