Installing a standard heatsinkInstalling a standard heatsink
Installing the high performance heatsinkInstalling the high performance heatsink
Removing a standard and high performance heatsinkRemoving a standard and high performance heatsink
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
T-20 Torx screwdriver
Alcohol wipe
About this taskAbout this task
WARNING:WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to
cool before touching them.
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
ProcedureProcedure
1. Power down the server.
2. If installed, open the cable management arm.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
To Next Page
Loading...
