ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing a fanRemoving and replacing a fan
About this taskAbout this task
This replacement procedure apply to all type of fans supported in the system.
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
IMPORTANT:IMPORTANT: The fan setup can either be all seven of standard or high performance fans. Do not mix fan types in the same
server.
ProcedureProcedure
1. Power down the server.
2. If installed, open the cable management arm.
To Next Page
Loading...
