b. Press the system battery down until it clicks into place (callout 2).
System board assembly replacementSystem board assembly replacement
SubtopicsSubtopics
Removing the system board assemblyRemoving the system board assembly
Installing the system board assemblyInstalling the system board assembly
Re-entering the server serial number and product IDRe-entering the server serial number and product ID
Removing the system board assemblyRemoving the system board assembly
PrerequisitesPrerequisites
Perform a backup of critical server data.
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
T-20 Torx screwdriver
Hex screwdriver—This tool is required if the serial port cable is installed.
Alcohol wipe
About this taskAbout this task
To Next Page
Loading...
