HPE ProLiant DL325 Gen11 - Procedure; Results; Removing and replacing a drive blank; About this task

CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
ProcedureProcedure
1. Back up all server data.
2. If installed, remove the front bezel .
3. Observer the drive LED status and determine if the drive can be removed.
4. Remove the drive.
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing a drive blankRemoving and replacing a drive blank
About this taskAbout this task
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
ProcedureProcedure
1. If installed, remove the front bezel .
2. Remove the drive blank.
LFF drive blank
HPE ProLiant DL325 Gen11 Server Maintenance and Service Guide 68