HPE NS204i-u Boot Device spare parts
Optical drive cable spare parts
Front USB and DisplayPort Y-cable spare parts
OCP bandwidth upgrade cable spare part
Removal and replacement procedures
Safety considerations
Electrostatic discharge
Symbols on equipment
Rack warnings and cautions
Server warnings and cautions
Preparation procedures
Server data backup
Remove the front bezel
Power down the server
Open the cable management arm
Extend the server out of the rack
Remove the server from the rack
Remove the access panel
Remove the middle cover
Remove the air baffle
Remove the riser cage
Remove the secondary riser cage blank
Remove the NS204i-u + secondary low-profile riser cage
Remove the fan
Remove the fan wall
Power up the server
Removing and replacing the front bezel
Removing and replacing a hot-plug SAS, SATA or NVMe drive
Removing and replacing a hot-plug E3.S drive
Removing and replacing a drive blank
Removing and replacing the optical drive bay blank
Removing and replacing the universal media bay blank
Removing and replacing the cable management arm
Flexible Slot power supply replacement
Power supply warnings and cautions
DC power supply warnings and cautions
Removing and replacing an AC Flexible Slot power supply
Removing and replacing a DC Flexible Slot power supply
Removing and replacing the secondary rise cage blank
Transceiver replacement
Transceiver warnings and cautions
To Next Page
Loading...
