5 Configuring the 5288 V3
About This Chapter
This topic describes how to configure the 5288 V3 after it is installed.
5.1 Default Information
5.2 Configuration Process
5.3 Checking the 5288 V3
5.4 Configuring RAID
5.5 Configuring the BIOS
5.6 Changing an iBMC User Password
5.7 Setting the Management Network Port IP Address
5.8 Installing an OS
5.9 (Optional) Configuring the Boot from iSCSI Function for an SP230 flexible NIC
5.1 Default Information
Table 5-1 lists the default user name, password, and IP address used for configuring the
server.
Table 5-1 Default information
Item
Parameter Default Value
iBMC management
network port
information
IP address and subnet
mask of the
management network
port
l IP address: 192.168.2.100
l Subnet mask: 255.255.255.0
iBMC management
system login
information
User name and
password
l User name: root
l Password: Huawei12#$
5288 V3 Server
User Guide
5 Configuring the 5288 V3
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 93
To Next Page
Loading...
Need help?
General