Step 3 Power off the 5288 V3. For details, see 4.2 Powering Off the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see 3.6 Removing the
Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the cables from the M.2 SSD riser card. For details, see M.2 SSD Riser Card
Cabling in 2.7 Internal Cabling.
Step 8 Remove the M.2 SSD riser card.
l For details about how to remove an M.2 SSD riser card from the mainboard, see 7.21.2
Removing a PCIe Card from the Mainboard.
l For details about how to remove an M.2 SSD riser card from a riser card, see 7.21.1
Removing a PCIe Card from a Riser Card.
Step 9 Loosen the screw on the M.2 SATA SSD card using an M3 Phillips screwdriver. See step (1)
in Figure 7-124.
Figure 7-124 Removing an M.2 SATA SSD card
Step 10 Lift the screw end of the M.2 SATA SSD card upwards and pull it out at a 20° to 30° angle.
See step (2) in Figure 7-124.
Step 11 Place the removed M.2 SATA SSD card in an ESD bag.
----End
7.60 Installing an M.2 SATA SSD Card
Install an M.2 SATA SSD card to replace the original one. An M.2 SSD riser card can be
configured with two M.2 SATA SSD cards. The replacement method is the same for the two
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 240
To Next Page
Loading...
